重型工件模具類轉臺式噴砂機（自動或手動）

此機采用低噪音噴砂機專用中壓風機

1. 特殊軌道推車設計，可把重型工件吊放在上面，十分方便，省力；

2. 推車轉盤，可根據客戶要求加固；

3. 一體式結構手動或自動推車攜帶轉盤，可自由進出；自動旋轉根據客戶要求定制。

4. 磨料自動回收，排風效果好，可耐高溫；

5. 達到模具及其他重型工藝表面處理要求，噴射力度可調；

6. 外觀設計新穎合理，整機高度適中。

 This machine adopts low noise sandblasting machine special medium

voltage fan

1. Special rail cart to the design, can hang on the heavy work, is very

    convenient, energy;

2. The cart wheel, according to customer reinforcement;

3. One-piece structure with rotary table, can be manually cart freedom;

4. Abrasive recovery, exhaust effect and can be high temperature resistant;

5. The operation process requirement, injection mould strength adjustable;

6. Appearance design is novel, the reasonable high moderate.

 ◆適用范圍 Applicable scope

本系列機適用于各類重型工件，產品的表面噴砂處理，如各類模具表面的梨地加工（噴砂）、模具咬花及霧面處理。重型工件噴砂除銹、氧化皮、粗糙度等。本系列機操作方便，可采用軌道推車上卸料，省力，加工效能好。本系列機都可根據需要，設計制作為手動或自動轉臺，轉臺直徑及承量；

The machines apply to all kinds of heavy workpiece surface piating, such as all kinds of mould surface pear to processing (sandblasting), mold textured and fog face treatment. The operation is convenient, can use rail cart on unloading, saving, processing efficiency. The machines can be designed according to the needs, for manual or automatic turntable, diameter and on volume.

 ◆主要技術參數 Main technical parameters以下型號僅供參考具體與業務對接